Suitable for fixed installations in telecommunication. They are to be used in locations with fire hazard and where insulation integrity of at least 180 minutes and circuit integrity of at least 90 minutes are required.
JE-H(ST)H BMK E90
Suitable for fixed installations in telecommunication. They are to be used in locations with fire hazard and where insulation integrity of at least 180 minutes and circuit integrity of at least 90 minutes are required.
1 ….. solid bare copper
2 ….. core covering with glassfibre tape (MICA)
3 ….. core insulation of halogen-free, cross-linked polymer, Cores
twisted to
pairs and four twisted pairs in a bundle, bundle identification by
Number
characteristic helix (Z) or ring mark on core insulation (Si)
4 ….. layer of plastic foil
5 ….. static screen of plastic laminated aluminium foil with
a solid tinned drain wire 0,8 mm
6 ….. outer sheath of halogen-free polymer (HM 2)
red with the marking “BRANDMELDEKABEL” (fire alarm cable)
These cables fulfil the conditions of the tests to insulation integrity
according to DIN VDE 0472-814/ 8.83 about 180 min. and IEC
Public. 331 first edition 1970 to circuit integrity about 30 min. to
DIN 4102-12 according to VDE 0100-710 and 0100-718.
DIN VDE 0815 (core identification)
DIN EN 60228 class 1 (construction)
DIN VDE 0207-24
Peak operating voltage [V]
225 Volt
Temperature range in motion
-5°C till +50°C
Temperature range fixed
-30°C till +70°C
Bending radius in motion x diameter
7,5
Flammability standard
EN 50266-2-4
Insulation resistance min. [MOhm/km]
EN 60332-1
Mutal capacitance [Ohm/km]
IEC 60332-3 Kat.C
Mutal capacitance max. [nF/km]
100
Capacitance unbalance 100m max [pF]
73,2
120
Suitable for fixed installations in telecommunication. They are to be used in locations with fire hazard and where insulation integrity of at least 180 minutes and circuit integrity of at least 90 minutes are required.
1 ….. solid bare copper
2 ….. core covering with glassfibre tape (MICA)
3 ….. core insulation of halogen-free, cross-linked polymer, Cores
twisted to
pairs and four twisted pairs in a bundle, bundle identification by
Number
characteristic helix (Z) or ring mark on core insulation (Si)
4 ….. layer of plastic foil
5 ….. static screen of plastic laminated aluminium foil with
a solid tinned drain wire 0,8 mm
6 ….. outer sheath of halogen-free polymer (HM 2)
red with the marking “BRANDMELDEKABEL” (fire alarm cable)
These cables fulfil the conditions of the tests to insulation integrity
according to DIN VDE 0472-814/ 8.83 about 180 min. and IEC
Public. 331 first edition 1970 to circuit integrity about 30 min. to
DIN 4102-12 according to VDE 0100-710 and 0100-718.
DIN VDE 0815 (core identification)
DIN EN 60228 class 1 (construction)
DIN VDE 0207-24
Peak operating voltage [V]
225 Volt
Temperature range in motion
-5°C till +50°C
Temperature range fixed
-30°C till +70°C
Bending radius in motion x diameter
7,5
Flammability standard
EN 50266-2-4
Insulation resistance min. [MOhm/km]
EN 60332-1
Mutal capacitance [Ohm/km]
IEC 60332-3 Kat.C
Mutal capacitance max. [nF/km]
100
Capacitance unbalance 100m max [pF]
73,2
120
Hitra in fleksibilna dostava
Osebni pristop
Širok nabor artiklov
Skrbimo za strankine želje
Sorodni izdelki
Halogen-free cables and wires
Safety cables are used in all locations where a high degree of protection against fire and fire-damage has to be provide ...
Halogen-free cables and wires
For the installation in electrical conduit on or under plaster or in similar closed systems especially for applications ...
Halogen-free cables and wires
For indoor use and the temporary outdoor use. Especially for applications where allowed in case of fire, only small amou ...
Halogen-free cables and wires
Suitable for fixed installations in fire detection circuits. They are to be used in locations with fire hazard and where ...
Halogen-free cables and wires
Safety cables are used in all locations where a high degree of protection against fire and fire-damage has to be provide ...
Halogen-free cables and wires
For fixed installations in devices and in or on lights, as well as for the house installation, especially for uses by th ...
Halogen-free cables and wires
Suitable for fixed installations in telecommunication. They are to be used in locations with fire hazard and where insul ...
Halogen-free cables and wires
Safety cables are used in all locations where a high degree of protection against fire and fire-damage has to be provide ...